Resistencias

Resistores De Película De Carbón

Resistencias De Cerámica

Eletrolíticos De Alumínio

Chip Resistor - Surface Mount

Current Sense Resistors

Fusible Chip Resistor

High Precision & Low TCR SMD Resistors

High Voltage Resistor

LED Strip Resistors

MELF Resistor

Metal Alloy Resistors

Metal Film Resistor (TH)

Metal Glaze Resistors

Metal Oxide Film Resistors

Metal Oxide Resistors

NTC Thermistors

PTC Thermistors

Photoresistors

Potentiometers & Variable Resistors

Precision Potentiometer

Resistor Networks & Arrays

Resistor Networks & Arrays (TH)

Ultra Low Resistors (SMD)

Variable Resistors

Varistors

Wirewound Resistors

Condensadores

Condensadores Electrolíticos De Aluminio

Condensadores - SMD

Condensadores Electrolíticos De Aluminio - SMD

Condensadores De CBB

Condensadores de tantalio

High Voltage Capacitors

Metallized Polyester Film Capacitor

Multilayer Ceramic Capacitors MLCC - Leaded

Multilayer Ceramic Capacitors MLCC - SMD/SMT

Mylar Capacitor

Niobium Oxide Capacitors

Polyester Film Capacitors

Solid Polymer Electrolytic Capacitor

Supercapacitors & Ultracapacitors

Suppression Capacitors

Tantalum Capacitors

Trimmers, Variable Capacitors

inductores y perlas de ferrita y transformadores

Inductores De Multicapa

Inductores De Bobinado De Alambre Enrollado

General Inductors (TH)

HF Inductors

Inductors (SMD)

LINE Filter

Power Inductors

Power Transformer

RJ45 Transformer

Radial Inductor (TH)

The circular inductors

Cristales Osciladores

49S

49SMD

49U

Ceramic Resonators

DIP Oscillators(XO)

Radial Cylinder Crystals

SAW Resonators

SMD Crystals

SMD Oscillators(XO)

Conector

Cableado enchufable

Bloques terminales conectables

Bloques de terminales a través de la pared

Card Edge Connectors

Circular Connectors

Connector - Card Sockets

Connectors

Connectors - Accessories

Connectors - Housings

Contacts

D-Sub Connectors

Ethernet Connectors/Modular Connectors

FFC, FPC (Flat Flexible) Connectors

Fiber Optic Connectors

IC & Component Sockets

LED Light Pipes

Mezzanine Connectors (Board to Board)

PCB Connectors - Headers, Male Pins

PCB Connectors - Headers, Receptacles, Female Sockets

PCB Connectors - Housings

Power Connectors

RF Connectors/Coaxial Connectors

Shunts & Jumpers

Terminal Blocks - Accessories

Terminal Blocks - Barrier Blocks

Terminal Blocks - Din Rail, Channel

Terminal Blocks - Headers, Plugs and Sockets

Terminals

Test Clips

Test Points/Test Rings

USB Connectors

Unspecified Connectors

Screw-type wiring

Spring-type wiring

Pluggable Terminal Blocks

Through-wall Terminal Blocks

Acceder

3. Presione "centro de cuenta" -> "Mis consultas" y revise el estado de sus consultas

Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.

Estoy de acuerdo con todos los términos y condiciones de UTSOURCE,Privacidad y términos legales
Agree Later Entregar

Sensitive Fire Detector, Fire Alarm Circuit.

Author:Utsource Date: 07/29/2019 SHARE

Product list:
『BD140 transistor』 view more: https://www.utsource.net/itm/p/257854.html
『100ohms resistor』 view more: https://www.utsource.net/sch/100R%20resistor
『10k resistor』 view more: https://www.utsource.net/sch/10k%20resistor
『LED』 view more: https://www.utsource.net/category/led-lighting-1.html
『Buzzer』 view more: https://www.utsource.net/itm/p/8027891.html


Step descriptions:

Step 1:-Cut off the pin C feet of BD140

Step 2:- The pin of the IR LED correspond to pin E and B, E is negative B is positive.

Step 3:-Solder the 10K resistor to the pin B .

Step 4:- The red LED , solder the negative terminal to the metal part behind BD140.

Step 5:-Solder the positive pole of the LED to the 100 ohm resistor and the 10K resistor is welded.

Step 6:-The positive pole of the buzzer is soldered together with the intersection of two resistors.

Step 7:-The jumper wire is connected to the negative of the buzzer, then connected to the negative pole of the LED.

Step 8:-The negative pole of the power supply is connected to the E pin of BD140. The positive pole is connected to the positive buzzer.



Get the parts from our online store:  https://www.utsource.net
Know more about Utsource: https://www.youtube.com/watch?v=tmJQq0FS9y8
Subscribe to Utsource channel:  https://www.youtube.com/channel/UCsWmWwb0S68rruOf8ebN8JQ/featured
Contact us:Email: sales@utsource.com

Follow us:
Facebook: https://www.facebook.com/utsource.net
Twitter: https://twitter.com/pantiejun
LinkedIn: https://www.linkedin.com/company/utsource
ВКонтакте: https://vk.com/utsource
Instagram: https://www.instagram.com/utsource_official
Pinterest: https://www.pinterest.com/bestutsource

Alternate Text

Please Iogin ? to participate in the comments New customer Start here.

Entregar

todavía sin comentarios

Alternate Text

Pagos globales

Logística global

footShip

Copyright © 2019 Power by UTSOURCE HOLDING COMPANY LIMITED